Subtopic	Posts		Updated
	Draft R12 SIT	1		07/07 11:59am
	Archive through July 10, 2010	25		07/10 09:50pm
	Archive through July 03, 2013	25		06/22 12:23pm

I like the D6C as seen in 4PW.

By Chuck Strong (Raider) on Thursday, May 22, 2014 - 02:22 am: Edit

FEDS Recommendation:

Generic SFB: Stellar Fortress Base; Ref 1.89; Factors: 50(12)PP/25(6)PP; CR10; Y179; Hull SFB(1); Conv From SB: TBD, From STB: TBD; Build: NA; Salv 0; Notes: Repair 18Pts; SIDS 10/5 (5 pts each)

By Ted Fay (Catwhoeatsphoto) on Thursday, May 22, 2014 - 09:57 am: Edit

Comment on Feds Recommendation regarding SFB (Stellar Fortress Base): Suggest note that 20 damage is necessary score a SIDS on a SFB using directed damage, which can be reduced with a mauler by up to 10 damage (depending on mauler value). These damage values harmonize with the required 18 damage to score a SIDS on a regular SB (which if self-taken is 4.5 damage, as opposed to 5 for the SFB).
-Ted Fay 5/22/14
FEDS: Concurs.

Comment on Feds Recommendation regarding SFB (Stellar Fortress Base): Decision should be noted on whether there will be a SFX (X-tech SFB). If so, SFX values and cost should be noted.
-Ted Fay 5/22/14
FEDS: While this would be an ADB call, FEDS would be supportive of an SFX. I could see its factors rated at 70/35 with 14/7 SIDS at 5 pts each (20 if using directed damage); 36 repair points; produces 2 XTPs; CR12?

Comment on Feds Recommendation regarding SFB (Stellar Fortress Base): If SFX are allowed, can a SB be directly converted to a SFX? If so, can this conversion be one turn as a single conversion, and at what cost?
-Ted Fay 5/22/14
FEDS: I would think so, but again the call belongs to ADB. Cost? To early to say.

Comment on Feds Recommendation regarding SFB (Stellar Fortress Base): Decision should be noted as to whether a BTS can be upgraded directly to a SFB, bypassing the regular SB, and if so at what cost. Likewise, whether a BTX can be upgraded to a SFX directly, and if so at what cost.
-Ted Fay 5/22/14
FEDS: The FEDS recommendation is that SFB would follow the established one- and two-step base conversion patterns where SFBs are created by the conversions of either SB or STB (not BTS); SFX from SB or SFB or STX or SBX.