View previous topic :: View next topic |
Author |
Message |
Scoutdad Commodore
Joined: 09 Oct 2006 Posts: 4754 Location: Middle Tennessee
|
Posted: Sun Dec 27, 2009 11:32 pm Post subject: Hydran Pegasus miniature - Complete and in ADB's hands |
|
|
I finsihed the Hydran Pegasus master and delivered it to WebMom yesterday morning.
More photos can be seen at the link in the signature below:
The completed miniature is just over 1 1/4 inches long. The hull is approximately 3/8 inch in cross section. The two lower wings are attached to the main hull. The upper wing will most likely be cast as a separate segment that will need to be attached by th end user.
The design is based on the 3D artwork and the multi angle views provided to me by Steve Cole. That's why is is roughly triangular in cross section rather than round as is presumed by most of us.[Yes, I too was under the mistaken impression that the Pegasus had a round cross section. That was the biggest cause of the delay in completion of this master. I had a Pegasus nearly 80% to 85% complete before I received the correct drawings and realized I had to restart the process.] _________________ Commander, Battlegroup Murfreesboro
Department Head, ACTASF |
|
Back to top |
|
|
OGOPTIMUS Captain
Joined: 10 Nov 2006 Posts: 980
|
Posted: Mon Dec 28, 2009 12:44 am Post subject: |
|
|
Sweet. I like what you did with the launch bays. Can't wait to see it when it's cast. _________________ O.G. OPTIMUS
Newest Page | Newer Page | OLD Page |
|
Back to top |
|
|
bluebirds38 Lieutenant Commander
Joined: 29 Oct 2009 Posts: 238
|
Posted: Thu Dec 31, 2009 10:17 pm Post subject: |
|
|
excellant looking miniature |
|
Back to top |
|
|
Dan Ibekwe Commander
Joined: 08 Mar 2007 Posts: 453 Location: Manchester UK
|
Posted: Fri Jan 01, 2010 12:46 am Post subject: |
|
|
Outstanding work, Scoutdad.
I'm a little surprised at the placement of the wings - all the images of the Peg I've seen so far placed them roughly halfway along the ship's length, rather than close to the stern.
No matter. I'll want a triad of these! _________________ We are Hydrans! NO ONE LIKES US! |
|
Back to top |
|
|
Scoutdad Commodore
Joined: 09 Oct 2006 Posts: 4754 Location: Middle Tennessee
|
Posted: Fri Jan 01, 2010 1:27 am Post subject: |
|
|
Yep. That was the big issue that kept thisone from being cast.
I got carried away mounting the wings to the engines and got them too far rearward.
Also, the upper wing does not have enough mountig surface to make assembly of the two pieces feasible. I suspect that had the wing connection worked, it may have been cast as is - but in for a penny, in for a pound, so as long as the wing-hull connection needed to be reworked anyway...
I'm now working on a new version... about 2/10 of an inch shorter, same cross-sectional area, and moving the wings to the mid-point of the hull.
This time, instead of pins along the bottom of the upper wing and mounting holes in the hull; it will have a wing-engine section that is a one piece assembly. This wing-engine section will mount into a 1/16 inch slot the length of the engine. This will allow for a firm, sturdy connection that can withstand the rigors of play.
In retrospect, this is how it should have been performed the first time around. But, I do learn more about the mini making process with everyone of these that I do. _________________ Commander, Battlegroup Murfreesboro
Department Head, ACTASF |
|
Back to top |
|
|
Dan Ibekwe Commander
Joined: 08 Mar 2007 Posts: 453 Location: Manchester UK
|
Posted: Fri Jan 01, 2010 1:39 am Post subject: |
|
|
Ah well. Thanks for the update, and Happy New Year. _________________ We are Hydrans! NO ONE LIKES US! |
|
Back to top |
|
|
|