View previous topic :: View next topic |
Author |
Message |
gurps_gm Lieutenant JG
Joined: 25 Jun 2010 Posts: 93 Location: Alameda, CA
|
Posted: Wed Nov 09, 2011 5:14 pm Post subject: The Old Light Cruiser |
|
|
Hi,
Looking for specs on the Old Light Cruiser: Length, Width, Height, Number of decks.
Where is the hanger deck, by the way?
I have GURPS Feds, so I have crew compliment.
Thanks in Advance!! |
|
Back to top |
|
|
Sgt_G Commander
Joined: 07 Oct 2006 Posts: 529 Location: Offutt AFB, Nebraska
|
Posted: Wed Nov 09, 2011 8:45 pm Post subject: |
|
|
Until now, none of that data was adresed. With the new Starline 2500 minis all being designed to be on the same scale, we will soon be able to estimate the size of most ships in SFU.
I just took some measurments on the screen-shot of the CA and oCL image (I hope it was the most current version), and the oCL body is roughly 173 meters long (not counting warp drive) by 85 meters wide by 18 meters thick (not including the 5-meter tall bridge dome). It should easily have five decks, tho only one will be full width of the ship due to the oval cross-section. _________________ Garth L. Getgen
Master Sgt, US Air Force, Retired -- 1981-2007 -- 1W091A |
|
Back to top |
|
|
djdood Commodore
Joined: 01 Feb 2007 Posts: 3413 Location: Seattle, WA
|
Posted: Wed Nov 09, 2011 9:31 pm Post subject: |
|
|
The shuttlebay door is centered, on the rear face, and always has been (even on the old metal mini). _________________
|
|
Back to top |
|
|
Steve Cole Site Admin
Joined: 11 Oct 2006 Posts: 3833
|
Posted: Wed Nov 09, 2011 11:15 pm Post subject: |
|
|
The data posted on the CL is as good as anything I have. _________________ The Guy Who Designed Fed Commander
|
|
Back to top |
|
|
gurps_gm Lieutenant JG
Joined: 25 Jun 2010 Posts: 93 Location: Alameda, CA
|
Posted: Mon Nov 14, 2011 4:26 pm Post subject: |
|
|
It's a start. I appreciate the help. |
|
Back to top |
|
|
gurps_gm Lieutenant JG
Joined: 25 Jun 2010 Posts: 93 Location: Alameda, CA
|
Posted: Sat Mar 03, 2012 4:27 am Post subject: |
|
|
Sgt_G wrote: |
I just took some measurments on the screen-shot of the CA and oCL image (I hope it was the most current version), and the oCL body is roughly 173 meters long (not counting warp drive) by 85 meters wide by 18 meters thick (not including the 5-meter tall bridge dome). It should easily have five decks, tho only one will be full width of the ship due to the oval cross-section. |
18 meters thick? Isn't that a little thin |
|
Back to top |
|
|
Sgt_G Commander
Joined: 07 Oct 2006 Posts: 529 Location: Offutt AFB, Nebraska
|
Posted: Sat Mar 03, 2012 5:17 am Post subject: |
|
|
Maybe. It wasn't as if I could do better than close approximations. I tried to go back and re-look at the imagery to see if I guessed wrong, but those topics are closed. If anyone has ST-2500 Fed minis, we can have them take some measurements. _________________ Garth L. Getgen
Master Sgt, US Air Force, Retired -- 1981-2007 -- 1W091A |
|
Back to top |
|
|
gurps_gm Lieutenant JG
Joined: 25 Jun 2010 Posts: 93 Location: Alameda, CA
|
Posted: Sat Mar 03, 2012 6:16 pm Post subject: |
|
|
Maybe I can kludge something from the stats from the BURKE-class Frigate and a Franz Josef ship.
Thanks. |
|
Back to top |
|
|
Sgt_G Commander
Joined: 07 Oct 2006 Posts: 529 Location: Offutt AFB, Nebraska
|
Posted: Sat Mar 10, 2012 10:34 pm Post subject: |
|
|
I just received my Fed minis. After measuring, I found the oCL mini is 54.5 mm long (body only, no warp drives) by 26.25 mm wide by 6.00 mm thick at the max points (not including bridge). However, the band the wraps around the ship just aft of the bridge throws the numbers off. Measuring the hull, I found it to be 20.75 mm wide by 5.00 mm thick.
At a scale of 1:3125, it's 170 meters long by 65 meters wide by 15.625 meters thick. Including the band, it's 82 meters wide by 18.75 meters thick. The "neck" between the for and aft sections is 36 meters wide at the narrowest.
At 15.625 meters, the ship is easily five decks thick, four of you want crawl spaces between the decks. Of course, it's always just as easy to fudge the numbers up "slightly". _________________ Garth L. Getgen
Master Sgt, US Air Force, Retired -- 1981-2007 -- 1W091A |
|
Back to top |
|
|
gurps_gm Lieutenant JG
Joined: 25 Jun 2010 Posts: 93 Location: Alameda, CA
|
Posted: Sun Mar 11, 2012 3:54 pm Post subject: |
|
|
That length is close to what I read in GURPS Federation, that the OLC is 75% the size of the heavy.
Thanks. |
|
Back to top |
|
|
Sgt_G Commander
Joined: 07 Oct 2006 Posts: 529 Location: Offutt AFB, Nebraska
|
Posted: Wed Mar 14, 2012 1:48 pm Post subject: |
|
|
I started to measure out the oCL mini to port it into Floor Plan Plus. I do NOT intend to map out the entire deck plans, but I will get the basic outline started and coverted to GIF image for someone else to take over. _________________ Garth L. Getgen
Master Sgt, US Air Force, Retired -- 1981-2007 -- 1W091A |
|
Back to top |
|
|
Sentinal Lieutenant JG
Joined: 21 Dec 2008 Posts: 34
|
Posted: Fri Mar 23, 2012 12:40 am Post subject: |
|
|
Don't forget to account for the fact that the OCL has an armored hull all-around. So some of that thickness should be considered with this in mind. _________________ B^) |
|
Back to top |
|
|
djdood Commodore
Joined: 01 Feb 2007 Posts: 3413 Location: Seattle, WA
|
Posted: Fri Mar 23, 2012 2:25 am Post subject: |
|
|
Armor in the SFU isn't thick hull plating. The name "Armor" is a bit of a misnomer. Then again, so is "Shields"; it's not like the ships are surrounded by escutcheons
SFU "armor" on a ship is banks of capacitance/dispersal units and other technological means of mitigating an enemy attack. There might be some extra hull thickness or some ablative coatings, but most of the function of dealing with damaging energy (plasma, electricity, heat, hard radiation, etc.) comes from the "armor" units performing their function actively (like modern-day "reactive armor" which explodes to disperse an attacking weapon's effects), as-opposed to the passive approach of traditional armor plate.
Nick Blank's deck plans for the Snipe showed the armor as an array of diamond shaped features, in the same sizing as the water and other consumables tanks that would normally fill the void space between the inner pressure hull and the outer hull plates.
Basically, instead of sticking consumables around the inner hull, the old ships stuck these sacrificial "armor" units. They act a bit like a modern surge protector - if a large amount of energy hits them, they take in that energy and direct it away from critical ship's systems, destroying themselves in the process. They can be replaced but it is difficult work (thus the high repair cost, in both SFB and FC).
Note that I avoided using the word "absorb" in the description I gave. SFU armor has nothing to do with Andromedan Power Absorber Panels (or at least not a lot to do with them; nobody *really* understands Andromedan technology except the Andromedans and they're not talking).
I'll also note that this modern interpretation of "armor" in the SFU evolved over time and there might be references in old fiction or flavor text that doesn't grok with it. _________________
|
|
Back to top |
|
|
Nerroth Fleet Captain
Joined: 08 Oct 2006 Posts: 1744 Location: Ontario, Canada
|
Posted: Fri Mar 23, 2012 1:40 pm Post subject: |
|
|
That's not entirely true in all cases; for the Trobrin Empire, the armor boxes do count as discrete belts (which, in some cases, can be removed to make space for other systems; as was done when some of the side belts on the Trobrin deep space dreadnought were taken out to make way for repair systems in the conversion to a space control ship).
In their case, part of the reason for this is also due to their unique physiology; the silicate Trobrin consume rock as their staple diet, so for them the armor literally counts as an emergency food source on extended patrol missions!
But in the case of the OCL (or its related designs in the Federation and Federal Republic), I would agree that the kind of ablative crystals shown on the Snipe deck plans would probably be fairly representative of how those Terran (and Auroran) armorclads work. _________________ FC Omega Discussion (v3)
FC LMC Discussion |
|
Back to top |
|
|
Steve Cole Site Admin
Joined: 11 Oct 2006 Posts: 3833
|
Posted: Fri Mar 23, 2012 3:06 pm Post subject: |
|
|
glug. _________________ The Guy Who Designed Fed Commander
|
|
Back to top |
|
|
|