Federation Commander

tlee33 · Ensign Joined: 28 Feb 2012 Posts: 9

Anyone replace the bases on the Starline 2500 line with hexes so that you can use them on a hex map for Federation Commander? I saw on the Litko.com site that they had 1" hex stands but I wasn't sure if they'd work with the larger ships.

Scoutdad · Posted: Tue Feb 28, 2012 11:22 pm Post subject:

I'm using Ninja Magic magnetic adapters from Rattlehead Games.

With one post on the mini and the other on a combination of Mongoose round and ADB hex bases, I can swap out at will.

The resin 2500s sit on the ADB stands quite nicely. When they convert to metal, they will need to have the hex bases weighted.
_________________
Commander, Battlegroup Murfreesboro
Department Head, ACTASF

Zamboni · Lieutenant JG Joined: 06 Mar 2012 Posts: 39

Ninja Magic also has a heavy metal stand that takes a 1" label plus has degree marks around the edges. I have a set on order, but it looks like it may be able to pull double duty for both games by including both sets of firing arcs.

ericphillips · Posted: Tue Mar 06, 2012 9:10 pm Post subject:

Litko has stuff as well:

http://www.litko.net/categories/Miniature-Bases-%26-Bottoms/Hexagons/
http://www.litko.net/categories/Flight-Stands/
_________________
"I could have been an adventurer like you, but I took an arrow to the knee."

Eric Lakin · Posted: Tue Mar 06, 2012 11:51 pm Post subject:

I like corsec engineering's hex bases. Below are 1.25" and 2" IIRC.:

(posted these on mongoose's board originally)

Marauder · Posted: Fri Mar 09, 2012 12:54 am Post subject:

I just also purchased some corseg bases myself. Since I'm only planning on using these for ACTA I selected the square bases with fire arc markings on them.

If I ever do decide to get back into SFB (or try FC) with these minis I can always order the hex bases.

-Tim

tlee33 · Ensign Joined: 28 Feb 2012 Posts: 9

I like the corsec hex bases...I was wondering though, do you think I could just buy the hex bases and then glue the Mongoose pegs into the base? Or is the hole in the base too big/small? This way I can interchange my starships with ball/socket into the mongoose base or switch it to the hex base.

Mike · Posted: Fri Jun 15, 2012 9:09 pm Post subject:

Did you hear about the guy who wanted to make his stands as authentic as possible, so he used magnets in order to put any ship on them he wanted.

During his first game using the new stands, he was using a Gorn battle cruiser against a Romulan opponent. The Romulan player's ship got within a couple of inches of the Gorn ship and suddenly was pulled straight to it. The Romulan player exclaimed, "What gives?!"

The Gorn player looked up and said with a sly grin, "Neodymium magnets...the Gorn Anchor."

Wink

_________________
Mike

=====
Sandpaper gets the job done, but makes for a lot of friction.

tlee33 · Ensign Joined: 28 Feb 2012 Posts: 9

lol, funny Smile

I can picture that happening Smile

Marauder · Posted: Tue Jun 19, 2012 8:58 pm Post subject:

I'm also using the corseceng omni stand system. I much prefer it to the ones they are packaged with. I have the square bases with firing arcs to use with ACTA and the hex bases to use with Klingon Armada.

-Tim

tlee33 · Ensign Joined: 28 Feb 2012 Posts: 9

I noticed that the mounts are different heights. did you drill larger holes to insert them and some you didn't? Or can you purchase shorter mounts to just glue on?

marcus_aurelius · Posted: Sun Aug 26, 2012 7:25 pm Post subject:

I am just now finishing my first 2500 miniatures and I am concerned with the optimal stand options.

The stands that come with the ships I am conerned about. The ball and socket seems prone to breakage and each base seems to have a uniform crack in it from the center. And one good fall seems to break off my Klingon engines. I looked at some of the links above and they were a little confusing to me and I was not sure if they work seamlessly or need to be adapted

I was thinking of ordering a bunch of 2400 stands (with the metal columns) and superglueing them to the 2500 ships, exactly as I do for my 2400 miniatures now.

Now that some time has gone by is there a better option for stands than my 2400 stand plan that anyone knows of?

Or are the stock 2500 stands fine and I am being overly paranoid?

archon96 · Lieutenant JG Joined: 20 Aug 2011 Posts: 65

I went with the core sec stand system it works real well. You either drill our the hole on the mongoose base or like i did i ordered a arc tool base from silver compass drilled out the center for the core sec bottom connector.

marcus_aurelius · Posted: Wed Aug 29, 2012 2:37 am Post subject:

Thanks! I watched the demo on the core sec engineering website, quite impressive. I will be ordering some to try out and perhaps a mat too.

Bill Stec · Lieutenant SG Joined: 25 Jan 2012 Posts: 158

I want to caution you all to gently screw the posts onto Corsec bases. I managed to crack one - I have just gotten them and didn't realize they were so fragile.