View previous topic :: View next topic |
Author |
Message |
OGOPTIMUS Captain
Joined: 10 Nov 2006 Posts: 980
|
Posted: Sun Mar 08, 2009 7:57 am Post subject: Gorn CM plasma-S location? |
|
|
Where are the plasma-S launchers on the Gorn CM mini? The SSD has them nearly on the ship's centerline, so are they on the tips of both the engines, like so many of the Romulan Hawk series ships? _________________ O.G. OPTIMUS
Newest Page | Newer Page | OLD Page |
|
Back to top |
|
|
Dal Downing Commander
Joined: 06 May 2008 Posts: 650 Location: Western Wisconsin
|
Posted: Sun Mar 08, 2009 8:21 am Post subject: |
|
|
Pretty sure on a CM they are located under the first Bubble because of the Firing arcs. they are both FP right? _________________ -Dal
"Which one of you is the Biggest, Baddest, Bootlicker of the bunch?"
"I am."
"ARCHERS!!! THAT ONE!!!!" |
|
Back to top |
|
|
Steve Cole Site Admin
Joined: 11 Oct 2006 Posts: 3828
|
Posted: Sun Mar 08, 2009 6:16 pm Post subject: |
|
|
Under front bubble. Definitely NOT engine mounted. _________________ The Guy Who Designed Fed Commander
|
|
Back to top |
|
|
OGOPTIMUS Captain
Joined: 10 Nov 2006 Posts: 980
|
Posted: Mon Mar 09, 2009 6:16 am Post subject: |
|
|
Thanks.
Got it--under the bubble. Any markings there that I'm missing on the mini? Mine's just unadorned, but that could be because it's also the BC mini which has all the plasmas on the wings.
For comparison, the battle destroyer has a small dome, but I think that's a sensor and not the plasma-G. Am I wrong there? _________________ O.G. OPTIMUS
Newest Page | Newer Page | OLD Page |
|
Back to top |
|
|
Dal Downing Commander
Joined: 06 May 2008 Posts: 650 Location: Western Wisconsin
|
Posted: Mon Mar 09, 2009 9:14 pm Post subject: |
|
|
OGOPTIMUS wrote: | Thanks.
Got it--under the bubble. Any markings there that I'm missing on the mini? Mine's just unadorned, but that could be because it's also the BC mini which has all the plasmas on the wings.
For comparison, the battle destroyer has a small dome, but I think that's a sensor and not the plasma-G. Am I wrong there? |
On the new CM/BC mini there is nothing graphically representive of the launher under the CM Bubble. It is one of those things like the Shuttle Pads that you would have to paint it on or build it up in the case of the launcher. Remember also that the BC doesn't have that Center Line Phaser tower built up on it either. So there are a few anomilies both way that were paid for flexability.
That same Dome is under the First Bubble of the DN as well so I have always assumed it was the Plasma G Launcher on the DD/BDD and a Plasma R on the DN. Note it is not under the original CA or CL so IMHO that would tend to void out the thought it was a Sensor Dome. _________________ -Dal
"Which one of you is the Biggest, Baddest, Bootlicker of the bunch?"
"I am."
"ARCHERS!!! THAT ONE!!!!" |
|
Back to top |
|
|
OGOPTIMUS Captain
Joined: 10 Nov 2006 Posts: 980
|
Posted: Mon Mar 09, 2009 10:27 pm Post subject: |
|
|
Thanks. Guess I'll sculpt a small dome onto the bottom with putty. _________________ O.G. OPTIMUS
Newest Page | Newer Page | OLD Page |
|
Back to top |
|
|
|