View previous topic :: View next topic |
Author |
Message |
markgeorgetwo Lieutenant Commander
Joined: 21 Nov 2006 Posts: 372 Location: london england
|
Posted: Sat Dec 05, 2009 10:04 pm Post subject: THE D5H |
|
|
Can anyone help me i want to build the klingon D5H i just want to know how to do it . |
|
Back to top |
|
|
SWO_Daddy Lieutenant SG
Joined: 14 Feb 2008 Posts: 195 Location: Stuttgart, Germany
|
Posted: Sat Dec 05, 2009 11:24 pm Post subject: |
|
|
I built a D5H by simply gluing a Klingon pod to the base of a D5 mini. Here's a picture:
I drilled a hole in the bottom of the pod, cut a stand short, and used a piece of brass rod as a ped to connect the two. I could have used a standard height stand, but the mini would have stood too "tall".
Because of the slope of the D5 rear hull, the pod isn't parallel with the axis of the boom. To correct this, you would have to build up a small "platform" on the underside of the D5 hull to keep the pod "flat". In my case, I just accepted the angle that resulted from the pod attached directly to the hull. _________________ Check out my website at: http://www.jgray-sfb.com/
|
|
Back to top |
|
|
markgeorgetwo Lieutenant Commander
Joined: 21 Nov 2006 Posts: 372 Location: london england
|
Posted: Tue Dec 08, 2009 9:42 pm Post subject: post subject |
|
|
Thanks my friend very helpful. |
|
Back to top |
|
|
|