Federation Commander

JohnDDW · Lieutenant JG Joined: 11 Feb 2017 Posts: 41

Just curious, got the federation commander reference rulebook recently. Do battleships have the same energy cost per base speed as dreadnoughts? Do corvettes have the same energy cost per base speed as frigates? I don't see them on the table in 2B1b.

Sgt_G · Posted: Wed May 13, 2020 5:31 pm Post subject:

Heavy Cruisers are typically move-cost 1.0
Dreadnoughts are typically move-cost 1.5
Battleships are typically move-cost 2.0
_________________
Garth L. Getgen

Master Sgt, US Air Force, Retired -- 1981-2007 -- 1W091A

mjwest · Posted: Wed May 13, 2020 9:44 pm Post subject:

What do you mean by "corvette"?

The small military ships have a movement cost of 0.25 (e.g. frigates and smaller). However, there is at least one civilian craft that has a movement cost of 0.125 and the gunboat movement cost (a class of ship not yet in the game) still has an undefined movement cost (though last thoughts indicated it would also be 0.125).
_________________

Federation Commander Answer Guy

JohnDDW · Lieutenant JG Joined: 11 Feb 2017 Posts: 41

Things generally "smaller" than frigates I suppose. Police Cutter (POL), Patrol Corvette (PC), etc.

djdood · Posted: Thu May 14, 2020 3:37 am Post subject:

The Federation VT corvette was introduced via Communique, some months back. Smaller than a frigate, but movement cost is still 1/4 point.
_________________

mjwest · Posted: Thu May 14, 2020 12:07 pm Post subject:

Steve Cole · Site Admin Joined: 11 Oct 2006 Posts: 3821

Remember that FedCom cannot comprehend odd numbered divisions. The Fed VT is 1/4 and the Fed FF is 1/3 in SFB. In FC they are both 1/4 because there is no way to divide 1/3 across eight impulses.
_________________
The Guy Who Designed Fed Commander

JohnDDW · Lieutenant JG Joined: 11 Feb 2017 Posts: 41

Very good. Thank you everyone for helping me out.

Sgt_G · Posted: Sat Jun 20, 2020 6:28 pm Post subject:

Would 3/8 work??
_________________
Garth L. Getgen

Master Sgt, US Air Force, Retired -- 1981-2007 -- 1W091A

Steve Cole · Site Admin Joined: 11 Oct 2006 Posts: 3821

We use 3/8 for FLEET ships that are 3/4 in SQUADRON.

Ships small enough to need 3/8 for squadron would be too small in fleet.
_________________
The Guy Who Designed Fed Commander

mjwest · Posted: Sat Jun 20, 2020 9:44 pm Post subject:

If suggested way back in the beginning of Federation Commander, I suppose 3/8 could have been a reasonable choice for the movement rate for the frigate. However, that would have produced a 3/16 movement rate for the fleet scale ships, and we have worked hard to not use any x/16 movement rates whenever possible. (There is one exception thus far, I believe.)

But, that's all water under the bridge, and it's too late to change the movement rate of frigates to 3/8.

Now, if you were talking about the VT (corvette), why would you want to give it a higher movement rate than the noticeably larger frigate? Given that the movement rate of the frigate is 1/4, there is no way to give the VT a movement rate of 3/8. So ... the VT is 1/4 just like the frigate.
_________________

Federation Commander Answer Guy