Klingon Deep Space Fleet

Upload your photos of our miniatures you have painted.

Moderators: mjwest, Albiegamer

User avatar
bluebirds38
Lieutenant Commander
Posts: 236
Joined: Thu Oct 29, 2009 3:15 am
Contact:

Post by bluebirds38 »

great paint job
User avatar
mojo_billbo
Commander
Posts: 426
Joined: Sun Mar 07, 2010 9:58 pm
Location: Danville, PA

Post by mojo_billbo »

bluebirds38 wrote:great paint job
thanks, I felt these turns out perfect on the first time. I had very good luck with this mix I made and I got the color I was looking for on the first shot.
User avatar
Dan Ibekwe
Commander
Posts: 449
Joined: Thu Mar 08, 2007 6:06 pm
Location: Manchester UK

Post by Dan Ibekwe »

A B10V and (half of) her fighter group;

Image

Image
We are Hydrans! NO ONE LIKES US!
User avatar
Steve Cole
Site Admin
Posts: 3846
Joined: Wed Oct 11, 2006 5:24 pm

Post by Steve Cole »

Dan, nice work, please email that B10V photo to Graphics@StarFleetGames.com and tell Joel I said to make it the April Mini of the Month.
The Guy Who Designed Fed Commander
Image
User avatar
Darkwing
Lieutenant Commander
Posts: 249
Joined: Sat Oct 23, 2010 5:14 pm
Location: ZZ 9 plural Z A

Post by Darkwing »

I know these are nonstandard, but looking at a fleet of all gray battlecruisers didn't appeal to me. I have built several 1/2400 wet navy warships from the WWII era and I am fascinated by the "dazzle paint" schemes that were used by various navies around the world. While people argue about their effectiveness, they make great subjects for war gaming miniatures.

So, I applied some of the ideas to my Klingon Deep Space Fleet. I decided that up to about the time of the General War, most ships wore simple gray schemes. Also, the standard model of any ship would be similarly painted.

Some of these minis are quite old and have been painted and touched up several times. A few have been moved, dropped, and repaired with varying degrees of skill.

Please, don't judge too harshly.

A C7, a D6, and an F5 (all basic models)

ImageImageImage

Exploration ships look the same, but have a light gray underside. Diplomatic ships have an oversized trefoil.

Here is the D7N Tyrant.

Image

Even before the General War started, a few ships were painted differently. Command ships (also dreadnoughts, leaders, and command cruisers [also the B10]) have a gray/gray camo scheme. I might also vary the size of the "splotches" to differentiate a C8 from a C9.

Here we see a B10, a C8, a D7C, and an F5C.

ImageImageImageImage

Other ships use the camo scheme, too. Check out the D6PFT (Blue/Gray camo), a D6J (Tan/Gray camo), a D5G and an F5G(Green/Green camo).

ImageImageImage

Later, more ships were painted in various schemes. Carriers got swirly stripes in light gray. Thicker stripes might mean the higher number (a C9 vs. a C8, or a D7 vs. a D6, but I am not sure yet.) Here is a C8V and an F5V.

ImageImage

Check out my D6Y semi carrier!

ImageImage

Escorts have light gray stripes on the "wings" while raiders such as the C5 have black stripes. The tiny E5 has three stripes on the neck as those on the body did not show up at all. (I do not have a raider example as I don't yet own a C5 mini.) Here we see an AD5/D5E, the AD6/D6E, and an F5E.

ImageImageImage

The schemes got wilder as the war dragged on. Space control ships often use both PFs and fighters, so both schemes are applied to these ships. The scheme was also applied to other ships in the "Control Ship" series. The blue splotches are applied OVER the carrier swirly stripes.

Here we see a C7S.

Image

Minesweepers have a geometric black scheme over the basic gray, while fast ships incorporate blue into the scheme. Here is a D5M.

Image

ISF ships are solid blue, except for the flagship, which (being a leader) uses a blue/blue camo scheme. Here is IKV Regulator.

Image

Drone ships have thick, jagged stripes of blue and black. Here are some examples a D6D (with special sensors) and an F5D.

ImageImageImage

By the end of the war, anything was possible. Scouts have thin jagged stripes of black and light gray applied over the darker gray. Also note that the placement of the sensor dishes varies, representing changes and experiments made over the years. Here is a D6S.

ImageImage

Supply ships have jagged black and dark blue stripes with light blue highlights along the blue stripes. Supply ships include the carrier resupply ships, military transports (freighters), LTTs, and tugs. Tugs are classed as transports no matter what type of pod they are carrying. Pods are not painted according to type. (They are all standard gray.)

Here we see a tug and a D5H.

ImageImage

The special weapons division handles maulers, stasis field ships, foreign ships in Klingon service, and any other special things I can come up with. They use a grid painted over the basic gray. This grid need not be perfect nor do any of the lines need to be parallel, equidistant, or even straight. Maulers use a light gray grid while stasis ships and foreign ships (RKLs) use a black grid.

Here we see a C7A, a D7A, a D6M, and an RKL.

ImageImageImageImage

My personal C7 (IKV Mirror, named for the ship from The Final Reflection) has a modified special weapons scheme. Here she poses with the captured destroyer Three Fingers.

ImageImage

I don't require that a player use these alternate schemes when they use my ships. I'll allow an opponent to have a squadron of "hot rod" D6s if they want, but if a special ship is in use, I do ask that the special scheme used for that type of ship not be used to represent a different type of ship.
Let's get DANGEROUS!

Tice Leonard, U.S.S. Lexington & IKV Annihilation
User avatar
Krellex
Lieutenant Commander
Posts: 261
Joined: Wed Sep 30, 2009 2:42 am
Location: RIS Phoenix

Post by Krellex »

Those look great! I really like how the RKL looks with that scheme.
Color me jealous of all your minis. :oops:
Image
User avatar
Darkwing
Lieutenant Commander
Posts: 249
Joined: Sat Oct 23, 2010 5:14 pm
Location: ZZ 9 plural Z A

Post by Darkwing »

Here are my B10 kitbashes after painting. They are painted in my "command" scheme of a gray/gray camouflage.

Also, I have included some shots of my C5 in the "raiding" scheme.

Here is the B8 combined dreadnought:

ImageImageImage

And a B10T emergency battleship:

ImageImageImage

B10 separated boom:

ImageImage

And the C5 Kommander Kurlt:

ImageImage
Let's get DANGEROUS!

Tice Leonard, U.S.S. Lexington & IKV Annihilation
User avatar
Jean
Site Admin
Posts: 1727
Joined: Thu Sep 18, 2008 9:17 pm

Post by Jean »

Darkwing, I bet you know what I would like to see!

I'm terribly ignorant about minis and the Steves despair of teaching me much beyond "this mini goes with this empire." :oops: If you do send pics to me, could you also let me know how to caption them?

Thanks!
Business Manager/RPG Line Editor
Amarillo Design Bureau, Inc.
User avatar
leathernsteel
Lieutenant SG
Posts: 196
Joined: Tue Jun 07, 2011 12:04 am
Location: Orlando, FL

Post by leathernsteel »

Klingon D7 Battle cruiser. I was mostly shooting for the look that they have on the megahex game pieces. And again, I'm sorry for the horrible photo quality of my I-pod
ImageImage

ImageImage
User avatar
Darkwing
Lieutenant Commander
Posts: 249
Joined: Sat Oct 23, 2010 5:14 pm
Location: ZZ 9 plural Z A

Post by Darkwing »

I do wish I could see them a little better, but that effect is really cool. A fleet of those would look pretty menacing!

Great work!
Let's get DANGEROUS!

Tice Leonard, U.S.S. Lexington & IKV Annihilation
User avatar
leathernsteel
Lieutenant SG
Posts: 196
Joined: Tue Jun 07, 2011 12:04 am
Location: Orlando, FL

Post by leathernsteel »

Thank you very much, Darkwing! I will ask around amongst my friends and see if any of them can help me take clearer pics so that you guys can really see my models.
User avatar
leathernsteel
Lieutenant SG
Posts: 196
Joined: Tue Jun 07, 2011 12:04 am
Location: Orlando, FL

Post by leathernsteel »

I finally got to use a good camera! I deleted my last post and am posting this as a replacement. In these photo's, the flaws in my work come through. There are two major problems I had, A: bad primer that gave an uneven undercoat. B: I was applying the paint right out of the bottle. That caused the coat's to be too uneven. Next time, I'll use good primer, and thin my paint out. Here it is in all it's glory, Klingon D7 Battlecruiser!
ImageImage

ImageImage

ImageImage
User avatar
Darkwing
Lieutenant Commander
Posts: 249
Joined: Sat Oct 23, 2010 5:14 pm
Location: ZZ 9 plural Z A

Post by Darkwing »

I had a couple of Zocchi pods lying around. From time to time I use them to make an odd-ball freighter, including a four pod number that will someday be lettered for British Dilithium. Anyway, I was going to build a large ore processing ship, but as I was collecting the parts, I found the command pod from a D5 that had given its life for another project. I ended up using that as the forward section of the ship (I know it's too small to be correct according to the SSD, but it looked so darn cool). It seems like I should have used the Klingon pods that come with the tug, but I figure that the Empire would have acquired any available ship to make one of these Heavy Auxiliary Cruisers.

Anyway, here is my take on the Klingon HAC (which will still be a large ore processor in our upcoming game).

Image

The red dots are the phaser banks. They are duplicated top and bottom. The black dots are the tractor beams. There is one set on the top and another set on the opposite pod, on the underside. The white dots are running lights.

Image

Image

Image

Image

Image
Let's get DANGEROUS!

Tice Leonard, U.S.S. Lexington & IKV Annihilation
User avatar
leathernsteel
Lieutenant SG
Posts: 196
Joined: Tue Jun 07, 2011 12:04 am
Location: Orlando, FL

Post by leathernsteel »

That thing looks cool! Good work!
User avatar
Jim Lewis
Lieutenant SG
Posts: 121
Joined: Fri Mar 25, 2011 8:41 pm
Location: Campbell, CA USA
Contact:

Post by Jim Lewis »

Here's my first Klingon mini:

Image

Image
Jim Lewis
GunTruck Studios
Image
Post Reply