SFB SSD into Ship Cards

Discuss general information about the Federation Commander gaming system here.

Moderators: mjwest, Albiegamer

Post Reply
User avatar
tilbarr
Ensign
Posts: 12
Joined: Wed Apr 15, 2009 2:18 pm
Location: Long Island, N.Y. U.S.A.

SFB SSD into Ship Cards

Post by tilbarr »

I believe there was a post somewhere on converting SFB SSD’s into ship cards for FC. Looked around the forum this morning and could not find it. Anyone remember what was changed on the ssd’s to use the cards with FC?
You Can Learn From Anyone, You only need to have an open mind and to listen.
User avatar
Sllarr
Lieutenant SG
Posts: 148
Joined: Tue Apr 01, 2008 2:10 pm

Post by Sllarr »

Hello there fellow Shipmate.

The only official article I have seen on this subject was " Project Z" , that was published in two parts in Captain's Logs #37 and #38.

It has a lot of detail on converting SFB SSD's to FedCom's Squadron and Fleet scales.
User avatar
tilbarr
Ensign
Posts: 12
Joined: Wed Apr 15, 2009 2:18 pm
Location: Long Island, N.Y. U.S.A.

Post by tilbarr »

Ok, have to try and get a look at the two Captains logs. But I thought I read a post in this forum as well.
You Can Learn From Anyone, You only need to have an open mind and to listen.
User avatar
jeffery smith
Lieutenant SG
Posts: 190
Joined: Wed Oct 11, 2006 5:34 pm
Location: Bothell,WA

sfb ssd's to ship cards

Post by jeffery smith »

caplog #39 has the early years article.
fun fun fun in the sun sun sun
User avatar
mjwest
Commodore
Posts: 4103
Joined: Sun Oct 08, 2006 4:30 pm
Location: Dallas, Texas
Contact:

Post by mjwest »

All three articles are excellent and well written, even if I have to say so myself ...

:lol:
Image
Federation Commander Answer Guy
User avatar
djdood
Commodore
Posts: 3407
Joined: Thu Feb 01, 2007 5:41 am
Location: Seattle, WA
Contact:

Post by djdood »

[pats Mike on the back] :wink:

I don't think there were ever any post on the board on how to do it, just some posts from those of us who have done it talking about what we did (and note, not sharing the results, which would violate the web-policy).

I've done cards for the Fed DDF, Monitor, Tug in various flavors, and Fedex Courier/FEX Escort - it was nowhere as easy of a process as I thought it would be (Fleet Scale is a mind-bender sometimes). I wish I had waited, because Mike's CapLog articles would have saved me a lot of brain strain.
ImageImage
User avatar
tilbarr
Ensign
Posts: 12
Joined: Wed Apr 15, 2009 2:18 pm
Location: Long Island, N.Y. U.S.A.

Post by tilbarr »

Thanks for the help guys. Yea got to be it, posts from those of you who have done it talking about what you did. Didnt think about web-policy, and should have. At the time I was reading through the forum I wasent considering purchasing another game system since I had SFB, till I figured out this was better than SFB.
You Can Learn From Anyone, You only need to have an open mind and to listen.
User avatar
Steve Cole
Site Admin
Posts: 3846
Joined: Wed Oct 11, 2006 5:24 pm

Post by Steve Cole »

I sent the Z1 and Z2 documents to Eric to upload to the site. Watch the "what's new" page and you'll be able to find them in a day or three.

Eric is scheduled to work Tuesday, Thursday, Friday.
He doesn't have enough to do today that he cannot do this today, but he might get lost in that fighter page project.
The Guy Who Designed Fed Commander
Image
User avatar
tilbarr
Ensign
Posts: 12
Joined: Wed Apr 15, 2009 2:18 pm
Location: Long Island, N.Y. U.S.A.

Post by tilbarr »

Much obliged Steve.
And finally figured out where I read that thread about SSD conversions, it was from a small forum on the Boardgame Geek site, the first place I read about Fed. Commander after doing a search for the game when I found out about its existance.
You Can Learn From Anyone, You only need to have an open mind and to listen.
User avatar
Steve Cole
Site Admin
Posts: 3846
Joined: Wed Oct 11, 2006 5:24 pm

Post by Steve Cole »

The Z1 and Z2 (SSD conversion) files are on the site now.
Eric also reformatted the older of the FC pages.

http://www.starfleetgames.com/fc/

You will find the Z1-2 files there.
The Guy Who Designed Fed Commander
Image
spud
Ensign
Posts: 18
Joined: Thu Aug 06, 2009 1:35 pm

Post by spud »

the downloads do not work at this time.
It's not the size of your sensor array that matters.
User avatar
tilbarr
Ensign
Posts: 12
Joined: Wed Apr 15, 2009 2:18 pm
Location: Long Island, N.Y. U.S.A.

Post by tilbarr »

Link to FC page working but download gives:

"HTTP 404 - File not found" error.
You Can Learn From Anyone, You only need to have an open mind and to listen.
User avatar
mjwest
Commodore
Posts: 4103
Joined: Sun Oct 08, 2006 4:30 pm
Location: Dallas, Texas
Contact:

Post by mjwest »

It has been reported. Hopefully, it should be fixed the next chance Eric gets.
Image
Federation Commander Answer Guy
User avatar
tilbarr
Ensign
Posts: 12
Joined: Wed Apr 15, 2009 2:18 pm
Location: Long Island, N.Y. U.S.A.

Post by tilbarr »

Thanks Eric, its up and working. Now I have an excuse to hold onto my boxes of SFB game books she wanted to throw out :roll: .
You Can Learn From Anyone, You only need to have an open mind and to listen.
Post Reply